Studio8 - Uniting the Arts

The formula

The force is equal to the mass time the velocity squared 
divided by the radius

note: this is important ,
centripetal (not centripetal) force


Also understand
 constant acceleration out the radial line

Consider (
all the weight on one side of a dryer

will make it jump across the room.


Elliptical orbit flywheels

apposed paired rotation

concurrent orbits


Secondary set apposed elliptical orbit flywheels 
on gimbals for lift


Hint : harnesses constant acceleration out radial line

from zero to circumference velocity

by lengthening and shorting
the radial arms with hydraulic cylinders

during rotation
 in concurrent quadrants of rotation

drawing , read with mirror https://picasaweb.google.com/home
nope that aint working
sums up with this
dam puterI
Will will try thisfile:///Users/davidwetzel/Desktop/Photo%20on%202-9-16%20at%2010-1.12%20AM%20%233.jpg

Ok , When your cloths get on one side of the washing machine on the spin dry cycle if it is bad enough the whole washing machine will jump around the room, roughly in a circle this is because the wet cloths are trying to go in a straight line away from the center of rotation.
the force required to make them curve around is centripetal force
centripetal |senˈtripətl|
adjectivePhysics
moving or tending to move toward a center. The opposite of centrifugal.
instead of the machine completely forcing it to go around the cloths are forcing the machine to try to go straight
Now if you have not looked at gyroscopes on line now is a good time to stop and do so, a gyroscope is like when all the cloths in the washing machine are spread out fairly evenly around the drum the outward wanting to go straight work against each other and the machine is fairly stable as no one direction as in the balanced gyroscope . now what I am doing is making a gyroscope that has an elliptical orbit but instead of the load swinging around it is pulled back by the hydraulic cylinders in the same part of rotation each time. this makes the machine go in the direction the load is trying to go.it is very strong simple transfer of energy and it can constantly accelerate with in limitations of power , once it breaks free of gravity( which is quickly) it will accelerate continually as the faster it goes the heaver it gets so the faster it goes , it re uses the acceleration factor out the radial arm try this to see picture needd mirror
https://picasaweb.google.com/home